Guff cutter 8 metres for homebuilder
- amariner
- Marin d'eau douce
- Messages : 5
- Inscription : 03 mars 2011 23:44
- Localisation : ukraine
- Contact :
Guff cutter 8 metres for homebuilder
Wooden or plywood Guff cutter 8 metres for homebuilder http://www.amariner.net/sailing_yacht_design_8m.html
Dernière modification par amariner le 06 mars 2011 13:36, modifié 1 fois.
- Txo
- Bosco
- Messages : 85
- Inscription : 30 nov. 2010 22:48
- Localisation : Ledeuix 64 -Quissac 30
- Contact :
Indéniablement beau. Par contre, comme la traduction en anglais est (pour moi ?) inaccessible, censuré me donne pour la bande rose du bas :
Ça fout la trouille !
Code : Tout sélectionner
Ne pas essayer de construire un bateau à les images téléchargées depuis le site - ne parvient toujours pas à comprendre quoi que ce soit, d'ailleurs, il ya des distorsions et des imprécisions - protection contre hitrovanov, qui est en attente d'une grosse déception.
- amariner
- Marin d'eau douce
- Messages : 5
- Inscription : 03 mars 2011 23:44
- Localisation : ukraine
- Contact :
That is the precaution not to use small pictures as woriking plans. they are not in an uniform scaleTxo a écrit :Indéniablement beau. Par contre, comme la traduction en anglais est (pour moi ?) inaccessible, censuré me donne pour la bande rose du bas :
Ça fout la trouille !Code : Tout sélectionner
Ne pas essayer de construire un bateau à les images téléchargées depuis le site - ne parvient toujours pas à comprendre quoi que ce soit, d'ailleurs, il ya des distorsions et des imprécisions - protection contre hitrovanov, qui est en attente d'une grosse déception.
- sly
- Second
- Messages : 1778
- Inscription : 30 avr. 2007 15:47
- Localisation : Aix les bains / Saint Raphael
- Contact :
Hello dear ukrainian reader, and thanks for the link.
Oh, we must write in the shakespeare language in this thread, aren't we ?
It's complicated by the german keyboard I'm using at the moment...
Oh, we must write in the shakespeare language in this thread, aren't we ?
It's complicated by the german keyboard I'm using at the moment...
Dernière modification par sly le 06 mars 2011 13:49, modifié 1 fois.
Mmmh, tu vois, Tuco, le monde se divise en deux catégories : Ceux qui ont un pistolet chargé, et ceux qui creusent. Toi, tu creuses... An-y-An-y-An...Ouin, Ouin, Ouin...
- JeanDidier
- Capitaine de bateau lavoir
- Messages : 521
- Inscription : 15 août 2010 09:49
- Localisation : Libramont
- Contact :
si il n'est pas possible d'obtenir les plans en direct, comment peut-on se les procurer autrement et en anglais (en français serait top)amariner a écrit :Hi dear friends, thank you, I can write in english only (and russian - is that better for you?)
I develop this boat design in wood for homebuilders worldwide, I am interested in yours opinions and wishes concerning layout and other things you want to say about
google trans. : if it is not possible to get the plans online, how can they be obtained otherwise and English (French would be fine)
- amariner
- Marin d'eau douce
- Messages : 5
- Inscription : 03 mars 2011 23:44
- Localisation : ukraine
- Contact :
Working plans are in development stage. It takes some 2-3 month. There are many work to draw despite 3D model is ready and all calculation are worked out.JeanDidier a écrit :si il n'est pas possible d'obtenir les plans en direct, comment peut-on se les procurer autrement et en anglais (en français serait top)amariner a écrit :Hi dear friends, thank you, I can write in english only (and russian - is that better for you?)
I develop this boat design in wood for homebuilders worldwide, I am interested in yours opinions and wishes concerning layout and other things you want to say about
[voleurs] trans. : if it is not possible to get the plans online, how can they be obtained otherwise and English (French would be fine)
- JeanDidier
- Capitaine de bateau lavoir
- Messages : 521
- Inscription : 15 août 2010 09:49
- Localisation : Libramont
- Contact :
- amariner
- Marin d'eau douce
- Messages : 5
- Inscription : 03 mars 2011 23:44
- Localisation : ukraine
- Contact :
I have a technical university education, but not naval. I started with boat design about 15 years ago for fun and my first serious boat was my own 9m masthead sloop MRIYA, designed and builded myself. A very successful boat - I won a national championship and many other races in our country.alien a écrit :Good evening Amariner .
Could you tell us a bit more about your goal .
Are you a professionnal naval architect ?
Do you intend to sell boat plans ?
Or is it just for fun or glory ?
Could you show us some real boats ?
A couple years ago I started with designing wooden boat for amauteur homebuilders. Yes, I sell my projects. They are meet our country registration department reguirements and suit to ISO standart.
Some my designs in building stage:http://www.amariner.net/building_ru.html
my boat MRIYA
- Eau douce
- Pilotin
- Messages : 154
- Inscription : 03 mai 2009 22:45
- Localisation : Le petit pays aux 175 lacs...
- Contact :
Tout en sécurité !
Salut,
J'aime bien leur fonderie :
Interesting application for a bath tub !
Nico
J'aime bien leur fonderie :
Interesting application for a bath tub !
Nico
Vers les 90 litres de ballast, mais toujours sans bateau !